Tuesday, 26 May 2015

Shotguns

A few years ago, Browning introduced the Maxus, which quickly replaced the venerable and popular Gold as the company's flagship semi-auto. (Gold fans might want to check out the raised-receiver Silver, which has the same gas operating system and is still in production.)
Overall, the Maxus represented a refinement of the Gold. It's lighter and more ergonomic and has a slightly more versatile gas system. I own a Maxus, and it's a great gun.
However, Browning unveiled another semi-auto last year that might challenge the Maxus for flagship status. The new A5 was a friendly face to many, with its familiar name and hump-backed receiver. Generations of hunters — mostly waterfowlers — grew up shooting the original Auto-5, or old Humpback as it was affectionately called.
While the Maxus and A5 are in many ways very different, they also share several similar attributes. For this comparison, I used my own 3½-inch-chambered Maxus and 3-inch A5. Let's take a closer look at these two 12-gauge shotguns vying for top-dog title among Browning's autoloaders.
The Maxus is a gas-operated semi-auto, powered by what Browning calls the Power Drive Gas System. The sealed gas piston has larger ports and is integrated with the piston sleeve for cleaner operation and greater load versatility. My Maxus handles all but the lowest-velocity loads (around 1,100 fps), digesting with ease 2¾-inch, 7/8-ounce target rounds up to the heaviest 3½-inch magnums, and everything in between. I've even run some short 2½-inch 1-ounce Venatum bismuth loads through it with no problems.
The A5 is recoil operated, but not in the same sense as the original Auto-5, which had a long-recoiling barrel that moved backwards upon ignition to cycle the action. Instead, the new A5 has what Browning is calling the Kinematic Drive operating system. A recoil spring inside the bolt compresses upon firing to cycle the action. Essentially, it's an inertia system, not unlike that found on Benelli semi-autos, except for one notable exception — the firing pin retaining pin fits into the bolt from the top, not the side, so it's much less likely to work loose.
Again, load versatility is excellent with the A5. I've shot everything from 1-ounce target and game loads at around 1,250 fps all the way up to 3-inch Hevi-Shot Speed Ball at an incredible 1,635 fps. During a recent trap outing, I ran a whole box of low-velocity 2 ¾-inch, 1 1/8-ounce Rio target rounds at only 1,150 fps through the A5 without a hiccup. It even cycled the short 2½-inch bismuth load with no problems. This year, Browning is offering a 3½-inch chambered A5, and although I haven't shot it yet, I expect load versatility to be likewise outstanding.
Recoil guns have a reputation for kicking harder than gas guns, and here the nod goes to the Maxus, which in my opinion is slightly softer shooting. However, post-shoot cleanup is much easier with the A5, since there isn't a piston to deal with. Browning has given both guns excellent recoil pads. The Maxus is outfitted with a soft Inflex pad designed to deflect recoil forces down and away from the face. The A5 has an even thicker Inflex II recoil pad that does an excellent job of cushioning the shoulder from the forces of inertia-induced recoil. It's also slicker than the Inflex pad, for less hang-up during gun mount.
Both guns have pancake-flat ventilated ribs. The Maxus sports a lone ivory front bead, while the A5 has a red-bar front sight and white mid-bead. Both guns have the quick-loading Speed Load Plus feature, an easily removed TurnKey magazine plug, sling studs and Dura-Touch finish on synthetic stock models, and shim kits for customizing length of pull, drop and cast.
Both guns also share the same .742-inch overbored barrel and extra-long Vector Pro lengthened forcing cone for improved patterns. However, the Maxus is threaded for the proven Invector-Plus choke tube system, while the A5 is threaded for the new Invector-DS system. DS stands for Double Seal, since a brass band at the bottom of the tube seals out gasses to keep the choke's exterior cleaner. Invector-DS chokes are ¾-inch longer than Invector-Plus, and threads are located at the top of the tube, not the bottom. Invector-DS is a fine enough system, but my sole gripe is any aftermarket Invector-Plus chokes already acquired won't work in the A5, requiring yet another set of choke tubes.
Traditionalists might be turned off by the Maxus' futuristic looks. Instead of a magazine cap, it has a squared-off Speed Lock Forearm, which uses a latch similar to a double's to secure the forearm and barrel. The front sling attachment is also integrated into the latch. The A5 has a traditional, yet robust, magazine cap which holds the forearm and barrel in place.
Then, of course, there's the A5's humpbacked receiver, which evokes a sense of nostalgia. That hump also aids in target acquisition, providing a rear sighting plane, which Browning has now dubbed the Humpback Acquisition Advantage. Shoulder an A5 and you'll immediately notice the difference compared to a rounded receiver gun, such as the Maxus.
Although my Maxus has a 3½-inch chamber and the A5 a 3-inch, the A5's receiver is about a half-inch longer. This is to accommodate the A5's recoiling, inertia-operated bolt. As a result, even though both test guns had 26-inch barrels, the A5 was slightly longer overall.
The A5 weighs more than the Maxus, but by how much is debatable, since my figures differed from Browning's published weights. Although the Maxus weighs slightly less, the A5 still feels lighter to me. Browning also has a name for this phenomenon: Ergo Balanced, meaning the A5 is balanced to have a light and lively between-the-hands feel. Not that the Maxus is a club, for it's also very ergonomic and responsive, but in hand the A5 feels lighter. This is probably due to the A5's moving parts being centrally located in the receiver, while the piston straddling the magazine tube gives the Maxus a slightly weight-forward feel.
Both guns have gold-colored triggers, but the edge here goes to the Maxus, which is equipped with an incredibly crisp Lightning Trigger. One wouldn't think a shotgun trigger matters much, but once you've shot the Maxus, you'll notice the difference. While the A5's trigger looks similar, it's just a standard trigger — not a bad one, mind you, but not quite as crisp. Both guns have large trigger guards that'll accommodate heavy gloves.
The Maxus has a magazine cutoff, which allows a shell to be removed from the chamber without releasing another one from the magazine — a handy feature, both from a safety standpoint and for when a duck load needs to be quickly swapped for a goose load. However, the cutoff switch is inconveniently located on the left side of receiver near the forearm where it's hard to reach and can dig into the leading hand if the forearm is gripped too far back.
While the original Auto-5 had a similar magazine cutoff, the new A5 doesn't. Instead, there's a bolt hold back button conveniently located on the bottom of the receiver just in front of the trigger guard. This is typical of inertia guns, since the bolt can be pulled back freely without releasing a shell from the magazine. However, of all the inertia guns out there, the A5's bolt holdback is one of the most user-friendly.
Each gun has surprisingly different safety buttons. While both are conveniently located behind the trigger, the Maxus has a standard, large, round safety. The A5 has an equally large safety, but it curves to extend up to the receiver, accommodating the trigger finger much like an indexing pad on a pistol.
So which gun is better? I don't know if I can conclusively say. Both shotguns are so different and so similar in so many ways that it's hard to declare one an overall winner. While I love my Maxus, using it for everything from clays and quail to geese and turkeys, I also bought the A5. For me, that was the only way to reconcile the issue.
One thing's for certain — Browning has a couple of winners on its hands, each equally worthy to carry the legendary gun maker's banner into the 21st century.

Friday, 22 May 2015

some of the best compound bows in the market in 2015.

There I have put some of the best bows in the market (for me).


Bear Archery Arena 34

So here's the first of many models that reflect the longer axle-to-axle trend. This one is 34.5 inches, has a 6-inch brace height, and shoots 340 IBO. I  really like these specs. A long bow helps smooth out the draw cycle, allowing for a shorter brace height and more speed without having to pay for it too much when you pull the bow back. All of this is evident in the Arena 34  with is very very fast. 
A new limb stop makes for a very solid back wall, if that's what you like. But you can remove it and go with a cable stop if you like a softer wall. To my eye, the combination of a sleeker riser and solid colors (olive green, tan, or black) makes for a pretty cool-looking bow. (Two camo finishes are also available.)

Misses:The length makes for a fairly smooth draw, but it's not exactly butter. It definitely wasn't as smooth as some,but this can probably be tamed.
    
there I put you one video that explain that bow

 Bear Archery Tremor and Traxx

 what I really like about Bear Archery is the value they offer in their mid-priced and low-priced bows. Today's flagships are routinely topping a cool grand, which is a pile of cash to drop on a bow almost no matter who you are. But Bear has two new models this year that deliver near-flagship performance for several hundred bucks less. If you're a smooth-bow guy, you'll want to look at the Tremor. This single cam has a 33-inch axle-to-axle length, 6-3/4-inch brace height, and shoots 322 IBO. If you're more of a short-bow, speed guy, the hybrid-cam Traxx has a 31-5/8 axle-to-axle length, same brace height, and goes almost 340 IBO. 
Except for a different riser and cable guard, the Tremor is pretty much last year's flagship single cam—the Vendetta—for significantly less dough. Ditto the Traxx, except it is basically the Agenda. Great value either way.


Misses: The Traxx has a fairly demanding draw cycle, buy hey, what do you want for 338 IBO at this price. The fit-and-finish is not top-end, but the deer won't care. 
there I put you one video that explain that bow
On the next article about bows hunting i'll talk about the news Mathews bows and I advance you that they are really good.

Thursday, 21 May 2015

Broadhead Test: Mechanical Vs. Sheet Metal

Today I'm going to speak about some of the best broadhead to hunt deers, feral hogs and boars.

Dead Ringer Super Freak
The Super Freak features an aircraft-grade aluminum ferrule and case-hardened, stainless-steel, trocar tip. Patented setscrew adjustments give the archer a choice between 1.75-inch and 2.25-inch cutting diameters. Spring stainless steel blades measure .032-inch thick and are tested to 185,000 foot-pounds of shear strength. The partially exposed blades make a .75-inch cut upon impact before over-the-top deployment to the full 1.75-inch diameter.
                   
G5 Havoc
The Havoc is a 2-blade design that incorporates a no-screws blade capture at the front end and G5’s Dual Trap blade-retention system that holds the rear of the blades securely until impact. An all-steel collar and elastomeric ring, which make up the Dual Trap, are designed to provide strength and reliability. The Lutz blades are .03-inch thick and reach a 2-inch cutting diameter when fully deployed. The stainless steel ferrule terminates in a cut-on-contact tip


Hunga Munga
The Hunga Munga features a 3-blade design that opens to a 1 7⁄16-inch cutting diameter. Blades are able to open independently and follow what the company calls a “Meat Scoop,” which pushes impact material into the blade to force deployment. A blade clip snugly secures each blade before and during flight, eliminating the need for O-rings or rubber bands and also reduces noise from rattling. The tip-forward design is intended to reduce deflection on steeply angled shots
             

Innerloc EXP 2-Blade
The EXP 2-Blade uses a small spring clip that acts as the pivot point for the blades and also applies a small amount of pressure that retains the blades in flight. A “cam” built into the blades interacts with the clip and actually varies the amount of tension they experience throughout the deployment process. Another unique feature is found in the two-function collar that can be flipped for two cutting-diameter choices — 1.125 inches and 1.44 inches. Stainless steel components are designed to get the job done regardless of weather or temperature.

NAP Spitfire Maxx
The Spitfire Maxx carries a larger cutting diameter than the original, with an advertised reach of 1.75 inches. No O-rings or rubber bands are needed, as NAP uses a unique, pressure-retention system to keep the .03-inch blades secure until impact. NAP’s patented, micro-groove ferrule is advertised to improve flight characteristics and penetration, while the Diamize sharpened blades are said to cause massive hemorrhaging.
                      
No Limit Archery Grave Digger
A combination of fixed and mechanical blades makes the Grave Digger unique among our contenders. A cut-on-contact blade made from 420 stainless steel forms the tip and creates a 1-inch cutting diameter, while the curved, mechanical blades open to a 1.75-inch cut. The curvature actually protrudes somewhat when closed, causing the mechanical blades to catch on the impact material and forcing them to deploy.

                              

bears, a difficult hunt

Today I'm going to speak about the calibers an the placement 
A good Alaskan brown bear can weigh two to three times more than a very big lion. It is the largest and most big carnivore on the planet.
        The shot:
a grizzly, or his Russian cousin must be treated with great caution. the first bullet that counts as once under the effect of adrenaline, a bear has a capacity to fit bullets that imposes respect.
the first bullet should go to the neck, elbow or head.
Grizzly Mountain, smaller than the brown bear is so well more aggressive. the black, clearly less aggressive bear not to be taken lightly. it is curious that in some regions of Alaska, black is reputed very aggressive and elsewhere, for example in Quebec, is quieter. matter of genes? who knows?
        Calibers and bullets 
for a grizzly mountain 338,8x68,300 gauge Weatherby kill him and an expansive bullet type 250 grains Nosler, Speer Grand Slam bearclaw 250 grains and 225 grains are excellent.
for the great osopardo off the coast of Alaska, we have seen can reach gigantic size, any size is too powerful. 375 or 416 are perfect, as the shot could be very close and leafy grounds with poor visibility. to hunt brown bear must equip the weapon with a detachable visor.
The black bear is much more fragile. it may well kill a black bear with a 270 and Core Lokt Regminton bullets. Hunting is generally in the depths of the woods and within walking distance. round bullet, blast and placed his head in the lungs-heart just easily with a black bear. Nor it needs too powerful caliber drilling risks without expanding; the best choice are round-headed bullets, 150 or 180 grains and not too hard.
                                             Resultado de imagen de bear shot placement


The best hunting dogs

Yesterday I was discusting with some friends about the best hunting dogs.


Labrador retriever: Without a doubt, the best all-around waterfowl dog you can find, Labradors were bred for marking, retrieving, and delivering waterfowl to a hunter’s hand.
Their physical attributes make them perfect for cold-water retrieving: a double coat for warmth and water repellency; webbed feet; a compact, muscled body; a thick otter tail for balance and maneuverability in the water.
As perfectly suited physically as they are for swimming and retrieving, what separates the Labrador from other retrieving breeds is its intelligence. In particular, Labradors mature faster than other breeds, which allow them to grasp training at a younger age and handle the learning curve of taking whistle and hand signals at great distances while performing blind retrieves, as well as the complex concepts involved in field trials.
They’re the most registered dog in America for both their prowess in the field and their disposition in the home. They’re the all-American dog that can hunt all day and then come home and play with the kids.
 

American  Foxhound: These dogs were bred with the purpose of hunting foxes, and are still very much up to that task. Deer hunters have also adopted their running skills to fall deer season, but American Foxhound are a great hunting breed because they will pretty much chase down anything you tell them to.
  

Beagle:Perhaps seen as the “iconic” hunting dog, the Beagle is much like the American Foxhound in its persistence, energy, and love of the chase. Its short legs handicap it somewhat in the pursuit of bigger game, but if you are hunting varmint like rabbits, the Beagle is your dog.

 Weimaraner : Unique and elegant looking, with long legs that may make them look awkward at first glance, Weimaraner dogs are fast and calm, perfect for hunting pheasant, quail, or other birds.


Teckelalthough its particular shape gives it its own identity, it has the same skills that terriers, which can be associated with this type of dog. The teckel can have three varieties of size and hair, that is, nine in all. its origin is Germanic, where he was selected primarily as an aid to hunt in thickets, good tracker and slow enough not to scare away the prey.

Tuesday, 19 May 2015

Deers ,not dangerous animals to hunt.

Today I will talk about the shooting and deer hunting calibres
and that the types of animals.

The safest and easiest way is the shot profile lungs. White is great and an animal with two punctured lungs collapsed very quickly. Pointing to these organs, meat is not destroyed may be only a delicious chops sacrifice. Well centered, firing into the lungs allows fairly wide margin of error. A little high, touching the spine; too low, touches the heart; too far forward, shoulders and back too, liver. It is not advisable to throw the heart, as it is much lower and the margin of error is very narrow. Moreover, contrary to the deeply rooted belief, shot in the heart does not mean instant death. An animal that goes beyond a bullet in the heart with both lungs punctured.
The headshot is not advisable. Although it is the fatal moment, it is difficult to put a bullet in the brain; if decentered, will make a terrible wound in the jaw or beyond. The headshot of ungulates justified to end an animal, provided they have trophy since we risk destroying it at the same time. Many trophy boars are lost because of bullets in the head.
calibers and bullets
klipspringer ungulates ranging from several kilos, moose in Alaska, a ton.
The weight of the part condition the weight of the bullet must ulizarse; capitulates in bales this issue in depth. We have seen that the types of bullets of rapid expansion, the expansion of multipurpose normally controlled parts such kind of weight to reach the very piercing bullets with minimal weight loss.
If you can pull animals lightweight bullets rapidly expanding, knowing that the skeleton of heavier and heavier animals but orientranos to the "hard" bullets.



then the explanation more photos of the filming locations.

Follow these golden rules:
      - An animal of a given weight corresponds to a bullet of a certain weight.
      - Avoid very expansive bullets, except in very long shots, in light pieces.
      - You better too heavy bullet and too harsh light because it is a better indicator of launching another too big too small.
      - The harder the piece that goes hunting, but the most difficult orientranos bullets.

 1) The very expansive bullets: ballistic type (Nosler and Winchester)
roe: 100 grains
Suede: 130 grains

2) controlled expansion bullets
  - Normal: Lokt thread type or Nosler Partition
  Deer: 165-220 grains
  Boar: 165-220 grains
  Caribou: 130-165 grains
  mule deer: 175 grains
  Spook: 175 grains

  - Duras: Barnes X or type Bearclaw
  wapiti: 220 grains

  - Very hard: Fail Safe or type A. Frame
  alaska moose: 250-300 grains

  American Bison: 300 grains